The 411 on Above Ground Pool Installation
Are you considering an above ground pool for your family to enjoy? They are available in a variety of sizes that you can choose from and, in comparison to in-ground large swimming pools, are a cost effective way to have a pool for your family to escape the summertime heat. However, when considering an above ground swimming pool, you may also be concerned about how to install it or whether to pay someone else to install it for you. Here is everything you need to know about how to install an above ground pool and above ground pool installation cost.
Above Ground Pools Installation Cost
If you prefer to have someone else deal with your above ground pool installation, you will ensure that your pool is installed properly. The ground will be leveled out the right way, all of the twigs and other stuff will be removed, sand put into place, and everything set up in a way that will ensure your pool lasts you through the years. This is recommended for large pools, such as the Splash Pools Above Ground Swimming Pools or Embassy Pools 24×52 Pool. However, many people do balk at the idea of paying someone to install the pool, after they already shelled out the money for a pool.
Some estimates on how much it will cost you to have it put up by a professional may range near $1000 and more. This price varies to according to how level the ground is before they arrive, your location, and the size of the pool you need installed. If you are concerned about whether you can put up your own pool, it will not hurt to make a few phone calls to see what your local pool installation company may cost you.
Find a Professional in Your Area =>
How to Install An Above Ground Pool
If you decide that paying someone to handle your above ground pool is not practical, installing it should be relatively simple for you to do yourself, especially for any Intex swimming pools. Simply follow the steps and installing above ground pool is a time consuming, but not overly hard process.
The first step is to gather up everything that you may need. Rakes or shovels for smoothing out the ground beneath your pool and of course the pool kit that you recently bought. Beyond that, you will also need to survey the land around your home to find the most suitable area for your pool.
From there, you will need to measure out an area of your yard that is slightly larger than your new above ground swimming pool. Mark it out using tape or any other items that you have available. This will become the area that you need to level and clear. The ground under your pool should not have grass, rocks, twigs or any other type of debris which may puncture the pool.
~Click to See The Best Above Ground Pool for 2020~
Level it out after you remove everything that you can from the area. Some people have sand delivered to them as a way to further ensure that the ground is free of all potential hazards to their pool. However, even the purest sand may still have some debris in it so checking over it is still a good idea. A lot of pools will come with a plastic ground cloth and you should use this on the bottom of your pool whether you use the sand or not.
Next, you will need to put down the above ground pool liner and stretch it out on the tarp and then put the rails for the pool together. If you have an inflatable pool, you will simply spread out the pool liner and inflate the ring on top. Start filling your pool and work out other wrinkles on the bottom while slowly covering the bottom with water. Removing wrinkles is very important regardless of which type of above ground pool you have.
If you have a metal pole supported swimming pool, like the Intex Metal Frame pool, stand up your supports and put all of that together. Slide the posts through any of the slots or sleeves that you have on the pool. Your specific pool setup instructions can be useful here because it will tell you where they are located.
Once this is completed, you will start putting water into your pool, working out any remaining wrinkles and searching to see if your pool has dips or high spots in it. Pay close attention to the edges of your pool. If they are off level, your pool walls will have less support and may cause the pool walls to fail over time.
As a final step in the process, you will connect your hoses and above ground pool pumps while the pool is filling. Follow the manufacturer’s instructions for your particular pool very closely to ensure that it functions properly. Assemble your pool steps or ladder and put it where you want it to be. Once the pool is full, test the water and add your necessary chemicals to ensure the water stays clear and ready for you to go swimming. If you are experiencing cloudy water after shocking your pool water, check out our guide on how to clear cloudy pool water.
Intex Pool Setup
If you still need more information on how to setup your Intex above ground swimming pool, there are detailed videos that can show you how to do it properly and a customer support team to help you if you need it as well. However, most people feel that it was easy to do, even if a little complicated for a first timer.